DynaweldENGINEERING COMPANY PVT. LTD.
Home / ServicesENGINEERING / IN DETAIL

Engineering for your
plant’s critical systems.

From new installations and plant expansion to shutdowns and maintenance, our four divisions bring design, fabrication, installation and commissioning into one coordinated scope.

MECHANICAL / SCOPE & CAPABILITIES

Mechanical engineering

IBR steam networks, boilers, process utilities and plant fabrication, from engineering to commissioning.

01

IBR steam pipelines

  • Design, drawings and stress analysis of pipelines, supports and steam distribution systems.
  • Material supply with IBR certificates; fabrication, erection and commissioning of pipelines, supports, expansion loops, PRS and PRDS.
  • Design and fabrication of mitre bends, tees and reducers from pipe, with IBR authority approvals.

Materials: carbon steel, stainless steel and alloy steels P11, P22 and P91.

Operating capabilities: pressure up to and above 125 kg/cm²; temperature up to 540°C; pipe size up to 40-inch NB; schedule up to 160.

02

Boiler erection

  • Site fabrication and erection of water-tube and waste-heat-recovery boilers for cogeneration and captive power plants.
  • Boiler, air preheater, economizer, superheater and deaerator erection.
  • ESP, pumps, associated piping and structural erection.

Boiler erection capabilities: pressure up to 85 kg/cm² and temperature up to 500°C.

Boiler erection experience with NHEC, Thyssen Krupp and Thermax.

03

Boiler maintenance & shutdowns

  • Supply, profiling, fabrication and installation of boiler tubes, superheater coils, economizer coils and bed coils.
  • Water-tube, waste-heat-recovery, power and process boilers; economizer maintenance.
  • Bed-coil and shell-tube replacement, boiler-bank tube replacement and accessories overhauling.
  • Chemical and mechanical cleaning of boilers and economizers.

Materials: carbon steel, stainless steel and alloy steels T11 and T91.

Operating capabilities: pressure up to and above 125 kg/cm² and temperature up to 540°C.

04

Utility & process piping

  • Gases: air, vacuum, hydrogen, nitrogen and blast-furnace gas.
  • Water: chilled, cooling, DM, RO, hot, drinking and raw-water systems.
  • Fluids: hydraulic, effluent, LDO, product, oil and thermic-fluid lines; fire-hydrant systems.
  • Mono / dual heat tracing, normal lines, overground and underground piping, and ducting.

Metallic materials: carbon steel; SS 304, 304L and 316; GI, DI and cast iron. Non-metallic materials: HDPE, PVC and Hume pipe.

Piping capabilities: up to 24-inch NB and schedule 80.

05

Equipment, tanks & structures

  • Fabrication and erection of storage tanks, chimneys, ducting and structures.
  • Erection and installation of equipment, pumps and compressors.
  • Painting of pipelines, storage tanks and structures.
  • Specialised redesign and modification of gas-turbine exhaust ducts.

Materials: carbon steel and stainless steels SS 202, 304 / 304L, 316 / 316L and 310.

Specialised work includes soda-ash-cooler coils, milk-dryer heat-exchanger retubing and a gas-turbine exhaust duct.

View mechanical clients & project details ↗
ELECTRICAL / SCOPE & CAPABILITIES

Electrical engineering

Power-system planning, industrial electrification, switchyards, transmission lines and panel manufacturing.

01

Project consultancy

  • Planning of electrical systems with HT and LT power distribution.
  • Captive power generation with DG sets; earthing systems; indoor and outdoor lighting.
  • Low-voltage data and voice systems, design, drawings, specifications and procurement assistance.

Project examples include substations, synchronised DG systems, APFC systems, switchyards and plant distribution.

02

HT / LT installations

  • Substations, transformers, VCBs and DG-set installation, testing and commissioning.
  • HT, LT, power and control cable laying and termination; cable-tray supply and installation.
  • Earthing, factory power distribution, plant lighting, IT and instrumentation installations.

Solutions include clean-room and flameproof installations, HT / LT VFDs, compact substations and bus-trunking solutions.

03

66 kV switchyards & transmission lines

  • Erection of switchyard equipment and structures, transformer bays and feeder bays.
  • Earthing meshes, control wiring, cabling and termination.
  • H-frame and tower erection, conductor stringing, LILO lines, strengthening and conductor / insulator replacement.

GETCO assignments across Ahmedabad, Vadodara, Navsari, Amreli, Patan, Mehsana, Gondal, Himmatnagar, Palanpur and other locations in Gujarat.

04

Panels, bus ducts & cable trays

  • Design and manufacturing of power-distribution, motor-control-centre, APFCR, lighting-distribution and machine-control panels.
  • Design, fabrication, assembly, supply and installation of electrical panels.
  • Copper bus ducts, bus-trunking systems and cable trays.

Experience includes bus ducts up to 6000 A and panel supply for Astral Technologies, Kenya.

05

Application-led electrical solutions

  • HT / LT VFD integration and energy-saving modifications.
  • Power distribution in high-temperature and dusty environments, with suitable panel locations and enclosures.
  • Space-saving compact substations, mezzanine-mounted panels and bus-trunking systems.
  • Clean-room, hazardous-area and flameproof electrical installations, including attention to static charging.

Solutions are selected around the plant layout, process requirements and operating environment.

View electrical clients & project details ↗
HYDROCARBON / SCOPE & CAPABILITIES

Hydrocarbon infrastructure

Construction and maintenance of oil and gas pipelines, station piping, storage tanks and connected facilities.

01

Oil, gas & city-gas pipelines

  • Laying and maintenance of cross-country oil and gas pipelines.
  • Fabrication, erection and maintenance of oil and gas headers.
  • City-gas-distribution steel lines, CNG station piping and associated cathodic protection works.
  • Skid fabrication and fabrication / erection of launchers and receivers.

Materials: 3 LPE-coated carbon steel, uncoated carbon steel and low-temperature steel.

02

Crude storage tanks

  • Fabrication, erection, calibration and maintenance of oil storage tanks.
  • Repairs including replacement of bottom plates and shell portions.
  • Storage-tank sandblasting and painting.

ONGC experience includes tank construction, repairs and maintenance across Ahmedabad and Mehsana assets.

03

Heaters, facilities & fire systems

  • Maintenance of bath heaters and heater treaters.
  • Oil-well headers, CTF / GGS internal pipelines and underground cross-country pipeline maintenance.
  • Fabrication and erection of fire-hydrant systems; hydrotesting and gas-line repair.

Client experience includes ONGC, Sun Petro, Sabarmati Gas, GSPC Gas, Mother Dairy, Cairn India and Interlink Petroleum.

View hydrocarbon clients & project details ↗
INSULATION / SCOPE & CAPABILITIES

E-glass fibre thermal insulation

South Korean E-glass fibre thermal insulation and comprehensive energy-conservation solutions, offered since 2009.

01

Industrial thermal insulation

  • E-glass fibre thermal insulation for industrial hot-fluid systems.
  • Supply and installation for steam, thermic-fluid and hot-product piping.
  • Pipe sections, mitre elbows, boards and felt, with fit-up, strapping and joint inspection before cladding.

Insulation clients include Vardhman Textiles, KRIBHCO, GNFC and Welspun.

Application selection considers the fluid, operating temperature, line geometry and access requirements.

View insulation clients & project details ↗

Have a scope in mind?

Share your plant requirements, operating conditions and execution timeline.

Speak with the relevant division ↗